SIT3232E

PartNumberPowerSupply（V）SignalingRate（Mbps）ESDAbility（KV）NO.OFEXTERNALCAPACITORS(µF)OperatingTemperatureRange(℃)No. of TXNo. of RXPackageStatusDatesheetSIT232ESE50.1224(1)-40~8522SOP16Active SIT202ESE50.12154(0.1)-40~8522SOP16Active SIT3232EESE3.3~50.12154(0.1)-40~8522SOP16Active SIT3232EEAE3.3~50.12154(0.1)-40~8522SSOP16Active

Number of views:

1329

Product serial number

Category

RS232

Quantity



Product description

Source/V:

3.3~5

Rate/Mbps:

0.12

ESD/KV:

Capacitance/uF:

4(0.1)

Temperature/℃:

-40~85

Send aisle:

Receiving channel:

Encapsulation:

SOP16/SSOP16/TSSOP16/SOPW16

State:

Active

Product:

RS232

RS232 Source/V:

3.3~5V

RS232 Rate/Mbps:

0.12Mbps

Part Number	Power Supply （V）	Signaling Rate （Mbps）	ESD Ability （KV）	NO. OF EXTERNAL CAPACITORS (µF)	Operating Temperature Range (℃)	No. of TX	No. of RX	Package	Status	Datesheet
SIT232ESE	5	0.12	2	4(1)	-40~85	2	2	SOP16	Active
SIT202ESE	5	0.12	15	4(0.1)	-40~85	2	2	SOP16	Active
SIT3232EESE	3.3~5	0.12	15	4(0.1)	-40~85	2	2	SOP16	Active
SIT3232EEAE	3.3~5	0.12	15	4(0.1)	-40~85	2	2	SSOP16	Active

Describe：

Sit3232e is fully compatible with MAX3232 and sp3232. Sit3232e is a RS-232 transceiver chip with 3.3V power supply, dual channel, low power consumption and high electrostatic protection, which fully meets the requirements of TIA / eia-232 standard.
Sit3232e includes two drivers and two receivers, with enhanced ESD protection function, which can achieve the contact discharge protection capability of HBM ESD above 15kV and iec-4100-4-2 of 8Kv.
Under 3.3V power supply, the charge pump only needs four 0.1uF external capacitors, and the rate can reach 120kbps error free data transmission. Both of them can be enabled and turned off independently. Each driver and receiver can be used independently.
Sit3232e is compatible with MAX3232 and sp3232, and has the following features:
3.0V ~ 5.5V power supply;
Dual channel;
120kbps communication rate;
15 kV HBM static protection;
Contact discharge of 8Kv iec-4100-4-2.

Please download the specification in the navigation bar > > download the specification